Polyurethane-based UV paint. It is used for the surfaces that are in permanent or periodic contact with water. Paint is resistant to sea-water. It is used for the signal marking of harbor areas, entrances and exits, berths, etc.
You can apply fluorescent paint Noxton with a brush, a roll, and an airbrush. A smooth layer of paint becomes resistant to water and mechanical effects after drying.
An average paint consumption is 0.5 l for 6 sq.m
Paint creates a bright fluorescent effect
0.5 and 1 l cans are available;
When touched by UV rays, the paint glows brightly;
COMPOSITION:
Made with high quality epoxy resins and addition of special fluorescent powder.
USAGE RATE:
0.5 L is 5 sq.m.
1 L is up to 10 sq.m.
WAY OF APPLYING:
AVAILABLE COLORS:
• White – in the UV light the paint gets a white-blue glow;
• Yellow – in the sunlight gets a bright yellow glow;
• Dark-yellow – usually has an aubergine color, gets a golden glow in any uv light;
• Red in the daylight – in the UV light gets a bright red glow;
• Orange – in the UV light – bright glowing orange;
• Pale-blue – in the UV illumination gets a light-blue glow;
• Blue in the daylight – in the UV light the painted surface gets a bluish glow;
• Dark-blue – in the daylight the paint has an intense color and in the UV light gets a deep blue glow;
• Green – in the UV light the paint gets a greenish glow;
• Pink – in the UV rays has a pale-pink glow;
• Dark-pink in any light – gets a dark-pink glow in the UV light;
• Purple in any light – in the UV light gets a violet glow;
ADVANTAGES OF FLUORESCENT PAINT NOXTON FOR WATER AREA:
• Fluorescent paint creates a resistant and time-proof coating on a surface;
• Makes painted elements and objects more visible both in the daylight and at night;
• It has a low consumption rate;
• Wide color range is available;
• Compliance with the production technologies guarantees water-resistance of the paint.
• It is a perfect combination of consumption rate and quality;
